BC-1 High-power magnetic stirrer

First, a brief introduction:：

High-power magnetic stirrer, widely used in colleges and universities, environmental protection, sanitation, epidemic prevention, petroleum, chemical industry, metallurgy, medical scientific research and production, is an essential tool for scientific research and laboratory personnel. In order to meet all walks of life type of magnetic stirrer. Mixer adopts dc motor, the no-load running up to 10000 hours, no noise, no vibration, mixing effect is remarkable。

Second, the technical parameters：

Third、Method of use：

 Please check whether the random accessories complete first, and then packed fixture, put the container in the center of the working face, add solution. In the mixing. According to the following steps; Switch on the power; 2 open the power switch; 3 to adjust speed control knob, from slow to fast to adjust to the required speed, do not allow the top starter, lest stirring and child due to unforeseen synchronous beat; 4 need to temperature control, insert the plug of the temperature sensor instrument board after the socket, and sensor probe inserted into the test solution。

Thirth、matters needing attention：

1、  Mixing found son beat or does not stir, please check the bottom of the beaker to cut off the power supply is flat, location are, please measure at the same time, the current voltage is between 220 v + 10 v, otherwise will appear the following situation. (this product must be reliable grounding！）

2、  Medium-speed operation can work continuously for 8 hours, high-speed operation can work continuously for 4 hours, while working to prevent violent vibration。

3、  Power: the power socket should use three Kong Anquan socket, must be properly grounded。

4、  Instrument should be kept clean and dry, strict solution into the machine, in order to avoid damage to the machine, cut off the power when not working。

5、  In order to ensure product reputation, buyer for our products within one year from the date of the unit itself quality problem caused by fault, repair all by our factory, and because of improper use, instrument surface with oil pollution, corrosion, colloidal substance, residue, such as damage, except shall charge will charge the freight back and forth or travel back and forth, and the maintenance after the remittance first. Our factory can produce special products according to customer's requirement, quantity size is welcome, stirring after use can be purchased from our factory。