Chinese medicine small dust-removing universal grinder

operating principle：

  Our company's universal mill is produced by using high quality stainless steel, 304 national standard of form a complete set machine, mainly used in chemical materials, traditional Chinese medicinal materials including roots, branches and block class materials, all kinds of oil content is not high grain and other hard and brittle materials. The machine USES the relative high speed running between the movable and fixed tooth discs to make the crushed objects get crushed through the impact, friction and collision of materials. , material can be directly from the eduction in grinding chamber, the discharging mouth, the general material should pass the cotton bags to collect after crushing, after crushing materials collected in the bag, the air out of a bag of tiny hole, will not be fine powder, thereby not waste, no pollution effect. The size of particle size is determined by changing the screen mesh with different mesh size. The structure of the machine is simple, strong, running smoothly, crushing materials fast, even, good effect. The machine is all stainless steel materials, (grinding groove) within the case all tooth surface precision machining so as to achieve a smooth, easy to clean, changed the ordinary grinder wall roughness, easy, difficult to clean up the phenomenon of accumulated powder, production of food, medicine, chemical industry and so on can meet the national standards, to meet the GMP health requirements.

technical parameters：

Notes:
1. The external power supply of the machine should be equipped with appropriate circuit breakers according to the power of the machine. The purpose is to cut off the power automatically when the machine is overloaded and the current is too large, so as to protect the motor!
2. Make sure the machine is under special care while working.
3. The crushed material particles should not be too large, if the machine (that is, the machine is too heavy load caused by the obvious slow speed or passive stop running), the power should be immediately cut off.
4. If the crushed particles are too large, they should be broken through the universal crusher before being crushed by the machine.