Clean Ovens, Class 100 (Programmable)

Clean Ovens, Class 100 (Programmable)

Reliable HEPA filter guarantees class 100 cleanliness inside of our clean oven. Ideal for specific use such as heat treatment and drying process.

with optional viewing window, digital differential pressure gauge

Model Name : OFC-20P/40P, 20HP/40HP

• 10 programs available for temperature ramp up and dwell control.
• 10 steps per a program and 99 hours 59 minutes per a step.
• Stored programs are easily linkable.
• Programs can be repeated up to 99 cycles.
• Pre-heating and heating time are settable before program starts.

• 0.3 μm and larger particulates are removed with 99.97% efficiency, leak-tight HEPA filter which satisfying class 100.
• Easy HEPA filter condition check by a built-in front differential pressur.
• Real time monitor of HEPA filter is available.
  - Optional digital differential pressure gauge let users know when filter needs replacement.

• Rapid heating performance up to max. 300°C (for OFC-HP)and max. 200°C (for OFC-P)
• Microprocessor PID control.
• Three point temperature calibration / Automatic tuning.
• Forced air convection generated by two noiseless and powerful sirocco fans ensures optimal air circulation, temperature uniformity, and short heat-up time.
• Adjustable dual slide vents for inner vapor circulation.
• Energy efficiency is achieved thanks to optimization of the insulation system.
  - Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures.

• Optimum model selection is available according to two different types of control panel.
  - Intuitive touch screen LCD controller with easy icons and logical menus. (for OFC-P/HP)
• Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
• Convenient presetting function for 3 most commonly used temperature settings.
• Rounded inner chamber corners for easy cleaning and optimal airflow.
• Corrosion-resistant incoloy sheath heating element and stainless steel interior.
• Threefold tempered-glass window provides clear inside view of the chamber. (optional)
• USB port and RS-232 port for external control and data collection.
• Casters for easy mobility during installation or relocation.

• Automatic run after power interruption.
• Over-current protection.
• Triple independent temperature monitor system. 
  -Temperature deviation alarm. (High/Low)
  -Electronic temperature limiter.(High/Low)
  -Mechanical over-temperature limiter.(High)
• Alarms for open door status, temperature sensor error and temperature deviation.
• Keypad lock function prevents accidental changes during operation.

1) Technical data according to DIN 12880.

for Clean ovens

• 

  Wire shelves

• 

  Perforated shelves

• 

  Tempered viewing windows

Wire shelves

Stainless steel and electro-polished shelf system is removed easily without using tools for easy cleaning.

Perforated shelves

Stainless steel shelf system is removed easily without using tools for easy cleaning.

HEPA filter

Biohazardous aerosols and other visible and non-visible particles. (filtration efficiency: 99.99% at 0.3 microns)

Digital differential pressure gauge

Digital differential pressure sensor allows for easy verification of HEPA filter condition great for knowing when to change HEPA filter.

Recorders

Easy recognizable digital recorders for efficient temperature indicating.

Gateway

Establish Jeio Tech Network by Gateway. No computer use is required at all. Remote monitoring of operating status through a mobile phone is simply available when you place a Gateway in your laboratory. Maximum 4 units can be connected to Gateway by RS-232 cable.