FG Fluid bed dryer

Product characteristics

Closed operating system to avoid cross-contamination

Precise temperature control and small fluctuation range

Dual-chamber system ensures continuous fluidization

Introduction of advanced polishing and polishing technology from Germany to make the surface of the equipment more exquisite

Visualized animation operation interface, intuitive, easy to operate, and easy to master

The key connecting parts imported from Germany are of high safety factor and durable.

The equipment is simple in structure, easy to disassemble and assemble, no dead angle, easy to clean and meet the requirements of cGMP specification.

Carefully designed airflow distribution structure, more uniform airflow distribution, higher production efficiency, more stable product quality and good reproducibility

The air flow structures of experimental, pilot and production fluidized beds are designed according to the same technical standard, so the parallel magnification and reproducibility of the products will be very good in the future.

Product function

Liuhua Bed Drying Granulator

High speed spray gun

1. External mixing

2. Adjustable droplet size

3. Adjustable angle of atomization

4. The size of atomized particles is very uniform and there is no pulse phenomenon.

Reducing the time of granulation and coating with large flow rate

6. Save the use of raw materials and excipients compared with ordinary spray guns

High speed spray gun

Filter bag

Imported 5/10/20/30/50 micron anti-static filter bag

2. Material is not easy to adhere and plug

3. Improving product yield

Maintain good ventilation rate

5. Easy to clean, not easy to cross-contaminate

Filter bag

Airflow structure

1. Precise aerodynamic calculation of cylinder structure

2. Uniform Circulation of Animal Material in Cylinder with Uniform Air Flow

3. Controlling the rising and settling speed of materials by controlling the wind speed of airflow

4. Combining the performance of the spray gun to achieve the best results in granulation and coating

5. Airflow design can be carried out according to the properties of materials, particle size and excipient properties.

6. The granules with uniform size distribution can be obtained, and the medication and coating can be carried out efficiently and uniformly.

7. Comparing with ordinary fluidized bed, it can produce particles with narrower particle size range, and the coating efficiency is more than twice that of ordinary fluidized bed.

Airflow structure