Incubated Shakers (Benchtop)

Digital incubating/ refrigerating benchtop shakers.

with optional dedicated platform and universal attachment

Model Name : IST-3075/3075R/4075/4075R

Control display

• Temperature range:
  - Ambient +5°C to 80°C for IST-3075 / 4075.
  - Ambient -15°C (Min. +15) to 80°C for IST-3075R / 4075R.
• Competitive high shaking speed up to 500 rpm.
• Orbital shaking motion in 19mm diameter.
• Microprocessor PID control.
• Three point temperature calibration / Automatic tuning.
• Wide speed range even with heavy workload.
  - Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
• Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.
  - Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
• Pleasant test environment by the smooth acceleration and deceleration control.
  - Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
• High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
• Air-tight silicone door seal to provide excellent temperature uniformity

• Intuitive touch screen LCD controller with easy icons and logical menus.
• Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
• Wide sample monitoring and convenient sample loading.
  - Convenient sample monitoring without affecting inside environment thanks to the three side transparent acryl lid with bright LED lamps.
  - Gas spring lid supports providing smooth motion, soft opening and closing.
• Repetitive task can be easily performed as the platform stops where it starts.
  - Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
• Corrosion resistance stainless steel interior.
• Built-in RS-232 port and USB port for external control and data collection.
• Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (when purchased LC GreenBox)

• Automatic run after power interruption.
• Temperature and shaking speed deviation alarm.
• Over-current protection, Stalled platform check.
• Mechanical over-temperature protection device.
• Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)

※ Above specifications can be changed without prior notice.

for Incubated Shakers

• 

  Flask clamps

• 

  Plastic clamps (plastic)

• 

  Funnel clamps

• 

  Dedicated platforms

Universal platforms / Flask clamps / Funnel clamps

Universal platforms provide flexibility for mixing assortments of test tubes and glassware of varying sizes on a single platform. Various clamps for Erlenmeyer flasks and separatory funnels are available.

※ Above accessories need to be mounted on a universal platform which is sold separately.

1) In the case of plastic flask clamps mounting, deformation may occur at temperatures over 40°C. Stainless steel flask clamps are recommended when using over 40°C and high temperature environment.
2) Possible to use under 300 rpm

Dedicated platforms

When using a single flask size only, the dedicated platforms with pre-installed clamps provide maximum capacity. 250mL and 500mL clamps arestandard but other sizes can be available.

* A dedicated platform is sold with setting each max. mountable amount of flask clamps on.

• 

  Test tube racks

• 

  Microplate holders

• 

  Rubber mats

Test tube racks

Easy to release and mount racks made of durable stainless steel with adjustable angle and tube height support. Test tube racks are used with an optional universal platform.

* No declination
※ We can manufacture other size of test tube racks to meet your specific requirements. Contact us for details.

Microplate holders

Available in three styles: tower type, flat type (small and large), and single type. Tower type holder is for 10 standard or deep well plates. Large flat holder is for 4 standard or deep well plates. Small flat holder is for 3 standard or deep well plates. Single type holder is for 1 standard or deep well plate. (standard well plates’ height: 14.7mm)

* Microplate holders need to be mounted on an universal platform which is sold separately.

Rubber mats

Designed for low-speed applications, non-skid rubber mats allow quick addition or removal of flasks, plates or tubes.

• 

  Spring wire racks
  (two tier rack with flexible crossed spring)

• 

  Universal attachments

• 

  Lab sticker

• 

  Retractable foot caster

Spring wire racks

Ideal for holding a wide variety of tubes, flasks, and other glassware. All components are made of stainless steel.

Universal attachments (utility carriers)

Several adjustable clamping bars for quickly securing a variety of glassware or tubes on non-skid rubber mats. Suitable for flat-bottomed flasks of various sizes.

Lab sticker

An alternative method for securing vessels to a shaker platform. Ideal for containers such as bottles and dishes that cannot be held on the universal platform with conventional flask clamps. For safe operation, gradual RPM increase is recommended.

Retractable foot caster

Highly beneficial for easy mobility during installation or relocation.

Stacking kits

Stackable up to 2 units using exclusive stacking kits for space saving. (only for ISS)

LC GreenBox

Real-time monitoring and control of device operation via mobile app.
Up to 4 devices can be connected at once.