Incubator (Air-Jacket) General type

Incubator (Air-Jacket) General type

Safe culture environment with air-jacket structure

Model Name : IB3-03A/05A/10A/15A

• Air-Jacket that conveys heat evenly inside the sample by heating the outside air minimizes scattering and contamination of the sample.
• Reliable and reproducible due to temperature verification according to strict international standards DIN 12880 and IEC 60068-3-5.
• Excellent heat insulation and minimization of heat loss due to using high temperature insulation material.
• External door can be opened and closed smoothly with magnetic packing to minimize sample impact.
• Stainless steel interior and shelves are excellent in terms of corrosion resistance and clean maintenance.
• Easy to clean as inner edges are curved.
• Useful cable port and cover on the side.

• Accurate temperature control through microprocessor PID feedback and 3-point temperature calibration.
• Auto tuning of PID coefficient suitable for use environment.
• The inner glass door is completely enclosed with silicone packing, making it easy to observe the sample without changing the temperature.
• Save and use 3 frequently used temperatures.
• Wait On/Off timer. (up to 99 hours 59 minutes)
• USB/RS-232 connection and software provide convenient computer operation and data.
• Monitor via mobile app anytime, anywhere with LC Connected mobile monitoring system (when purchased LC GreenBox)
• When power is restored after power failure, the equipment automatically operates according to the previous operation information.

• Top-rated overheating protection system. (Registration 10-0397583)
• Safety circuit design to protect against overcurrent and overheating.
• Over temperature limit function. (Over Temperature Limiter)
• Error display and alarm when an abnormality occurs during operation.
• If a temperature sensor error occurs during operation, the temperature control is stopped, and a warning window is displayed.
• Malfunction prevented by controller lock function.
• Automatic stoppage of heater and fan when door is opened.

Two series of models according to heat transfer method

• Forced Convection
• The structure allows for the inside air to be circulated and the temperature to be controlled, producing stable temperature control and good distribution. However, the amount of moisture evaporation of the medium is relatively high.
• Save and use 3 frequently used temperatures.
• The air-jacket structure heats the outside air in the space where the sample is placed and transfers the heat to the inside, and the moisture evaporation amount of the medium is relatively low.

※ The lowest temperature that can be controlled depends on changes in room temperature and sample temperature. Therefore, please contact the distributor of our products before purchasing for technical consultation.

※ Technical data (according to DIN 12880 after 2013)

• 

  Wire shelves

  Excellent corrosion resistance as made of stainless steel.

  Excellent air permeability and uniform temperature distribution.

• 

  Perforated shelves

  Porous structure made of stainless steel.

  Solid structure makes it suitable for high load samples.

• 

  LC GreenBox

  Monitor and control the operation status of the device in real time via mobile app with simple internet connection.

  One LC GreenBox can connect up to 4 devices.

Wire & Perforated shelves

LC GreenBox

Double-stacked bracket

Oven / incubtor bracket for double stacked.