GBW concentrated sulfuric acid pump Horizontal

Category:Fluid Equipment > Pumps
Product Name:GBW concentrated sulfuric acid pump Horizontal
Price(USD):0.00
Company:Shanghai BaiNuo Pump & Valve Co., Ltd.

Basic Info
  • Factory Location: shanghai,China

    Main Sales Markets: North America,Central/South America,Western Europe,Eastern Europe,Australasia,Eastern Europe,Australasia,Asia,Middle East,Africa

  • Sample Provided: no

    Horizontal GBW concentrated sulfuric acid pump is based on the performance parameters ISW -type centrifugal pump , using concentrated sulfuric special cast iron , carbon steel, two kinds of materials and excellent water conservancy model to optimize the design, it is ideal for a new generation of chemical pumps are widely used the major chemical companies concentrated sulfuric acid medium transport . The main features 1 , smooth : Excellent concentrated sulfuric acid pump shaft and impeller absolute concentricity static and dynamic balance , to ensure smooth operation , no vibration. 2 leak : the shaft seal with externally mounted high quality mechanical seal , dynamic and static ring using the new silicon carbide on silicon carbide , corrosion , abrasion , no leakage, long life. 3, low noise: two low -noise pump bearings under smooth operation, in addition to the faint sound of the motor , almost no noise. 4 , low failure rate : simple and reasonable structure , a key part of supporting the use of world-class quality , the whole time between failures is greatly improved. 5 , easy maintenance : Replace the seals, bearings , convenient and easy . 6 , covering more provinces : exports to the left , right, up three directions , then piping installation , save space. Model significance GBW50-125 GBW - horizontal centrifugal concentrated sulfuric acid 50 - pump suction , discharge outlet diameter (mm) 125 - impeller diameter (mm) Selection based on GBW concentrated sulfuric acid pump a lot of special steel used in 80 to 100 % sulfuric acid , the temperature can reach 60 ~ 80 ℃. The steel in sulfuric acid concentration and temperature range , the surface can produce a protective film sulfate . Cast iron does not apply to more than 100 % fuming sulfuric acid , sulfur trioxide may be due to the reaction with the iron contained in the silicon , so that the cast iron becomes brittle . Carbon does not apply to 100 to 102 % fuming sulfuric acid , more than 102 % of the acid is then applicable , the temperature limit of about 60 ℃. Sulfuric acid corrosion of the steel is large, when the acid concentration is about 47% , the corrosion rate of the highest value. When the acid concentration is greater than 65% , the corrosion rate of the steel is significantly reduced. However, in this period of 65 to 80% concentration , it is best not to use steel to use lead or other acid -resistant material more secure. Sulfuric acid concentration : 80 % to 98% iron using special temperature : 25 ℃ ~ 50 ℃ Sulfuric acid concentration : 80% ~ 98% special steel Temperature : 25 ℃ ~ 60 ℃
Send your message to this supplier
  • From:
  • To:
    Shanghai BaiNuo Pump & Valve Co., Ltd.
  • Send a Copy to this Email
  • Message:
    Upload Images / Files
    - Supports jpg, jpeg, png,
     gif, pdf, doc, docx,
     xls, xlsx, txt, rar and zip
    - Max upload 3 files;
     Max  total size: 3MB
    (0/3)

    Enter between 20 to 4,000 characters.This is not what you are looking for ? Post a Sourcing Request Now

  • Verification:
PharmaSources Customer Service